Pebble Pool Maintenance Guidelines

There are certain Pebble Pool Filling Instructions.

Before filling any pool its mandatory to check the hose/home water tested prior to pool filling to check it’s chemistry before it has an opportunity to effect the new interior of any pebble pool. This can easily be done at any pool retail service store.

The operation of an Inground concrete is no difference than above ground pool water. Both have a filtration system that circulates the water and keeps it clean and free from debris. Routine maintenance is required for any pebble pool interior for its smooth operations and smooth condition.

  1. Always use a pool skimmer to remove any floating debris from the surface of the water.
  2. Clean the sides of the pool by scrubbing them with plastic bristle pool brush.
  3. Vacuum the bottom surface by slowly moving the vacuum cleaner.
  4. Check, if required sanitize the pool water by adding pool chlorine once every two weeks. Pool chlorine is available in solid or liquid form.
  5. Cleaning cartridge filters will be necessary once the pressure gauge reaches 50 KPA for start pressure.
  6. PH Level check is another important factor for any pool renovation guideline. PH score goes from 0 to 14, where PH 7 is neutral. If the PH is above 7, which means water is basic; if it is below 7 the water is acid.

Leave a Reply

Your email address will not be published. Required fields are marked *